A rack railway climbs slopes that ordinary train wheels cannot grip

A rack railway climbs slopes that ordinary train wheels cannot grip
Image: Intellect (generated)

In short: Ordinary trains rely on friction and stall on slopes steeper than about ten percent. A rack railway solves this with a toothed rail between the tracks and cogwheels underneath the train. Engineers have built routes at gradients of one hundred percent, roughly forty-five degrees, and the mountain lines built in the 1800s are still running today.

The core idea is simple. A toothed rack rail sits between the two running rails, and one or more cogwheels, or pinions, on the locomotive mesh with its teeth. Friction between smooth steel wheels and smooth steel rails is too weak for steep ground, so the train is effectively pulled up the hill by its teeth. The same mesh gives more controlled braking and lessens the trouble that frost and ice cause on the track. Most such lines climb mountains, though a few are urban transit or tramways built to climb a steep street. The history is a story of several inventors working in parallel.

John Blenkinsop built the first commercially successful example on the Middleton Railway near Leeds, where his locomotive Salamanca ran in 1812, although his system became a curiosity once friction was found to be enough on level ground. The first mountain cog line was the Mount Washington Cog Railway in New Hampshire, which carried fare-paying passengers in 1868. In Switzerland, Niklaus Riggenbach, working independently, built the Vitznau–Rigi line, which opened in May 1871. Later designs by Carl Roman Abt, Eduard Locher and Emil Strub each solved problems the earlier systems had, such as expensive racks, derailments on steep grades and difficult turnouts.

The designs differ in important ways. Some systems place the rack centrally between the rails, while the Locher system uses a flat bar with horizontal teeth and horizontal pinions, which suits gradients as steep as one in two. Some lines are pure-rack, where the cogs alone drive and brake the train and every section of track needs rack rail. Others are rack-and-adhesion lines, which use the cogs only on the steepest sections and run as normal railways elsewhere, with a transition system to bring the teeth gently into engagement. Rack railways also constrain engineering choices. Steam locomotives had to be tilted so that their boilers stayed level on steep track, and the boiler must stay covered with water to avoid failure, so many lines were laid on gradients throughout, including their workshops. This is one reason these lines were among the first to be electrified, and electric power now dominates. Trains move slowly, typically between about 9 and 25 kilometres per hour, depending on the gradient and the propulsion method.

Opens the Intellect+ feed with this card first. Swipe up for the next one.

Sources

To cite this card, link to https://intellectplus.co.uk/app/technology-rack-railway.

How we source, check and correct cards: Editorial standards.

General information, not professional advice. Spotted an error? Flag the card or see corrections and complaints.

Intellect Plus is a visual educational discovery platform for exploring fascinating facts and ideas. Brain Food, Not Brain Rot. What is Intellect Plus?

Related

Finding something worth knowing…