A ball bearing lets balls do the hard work of reducing friction

A ball bearing lets balls do the hard work of reducing friction
Image: Intellect (generated)

In short: Rolling beats sliding. A ball bearing places small steel or ceramic balls between two races so a spinning shaft meets far less resistance than two flat surfaces rubbing together. The basic idea is old, the first modern design dates to 1794, and the principle still runs inside bicycles, pumps and aircraft engines today.

Think of a ball bearing as a device for swapping sliding for rolling. Its job is to cut rotational friction while carrying both radial loads, which press across the shaft, and axial loads, which press along it. It does this with at least two races that hold the balls and pass the load through them. Usually one race stays fixed while the other turns with the shaft, and that motion sets the balls spinning. Because a rolling ball resists motion far less than a surface dragging over another, the whole assembly turns easily. There is a trade-off, though.

Since the balls touch the races over a small area, a ball bearing carries less load for its size than other rolling-element designs. In exchange it tolerates some misalignment between the inner and outer races. Designers choose a type to suit the job. Angular contact bearings handle combined radial and axial loads, and a larger contact angle favours axial load. Deep-groove bearings support both directions without any choice of contact angle. Thrust bearings take axial loads directly but cope poorly with radial ones.

Materials matter as well. Balls can be made from stainless steel, chrome steel or ceramic such as silicon nitride. Ceramic balls can weigh up to 40 percent less than steel, which lowers centrifugal loading, and hybrid bearings with ceramic balls and steel rings can run 20 to 40 percent faster than conventional ones. The catch is that ceramic is stiffer, which raises stress on the rings and can reduce load capacity.

The history involves several inventors. Philip Vaughan, a Welsh ironmaster, created an early design in Carmarthen in 1794, and a Parisian bicycle mechanic later produced the first radial style in 1869. Robert Conrad's patents of 1903 and 1906 described the assembly method that carries his name. Each stage refined how balls could be packed in and held in place, which is why a bearing that looks simple hides a long run of engineering.

Opens the Intellect+ feed with this card first. Swipe up for the next one.

Sources

To cite this card, link to https://intellectplus.co.uk/app/science-ball-bearing.

How we source, check and correct cards: Editorial standards.

General information, not professional advice. Spotted an error? Flag the card or see corrections and complaints.

Intellect Plus is a visual educational discovery platform for exploring fascinating facts and ideas. Brain Food, Not Brain Rot. What is Intellect Plus?

Related

Finding something worth knowing…