Brushless motors replaced mechanical brushes with electronic switching, and that changed nearly everything

Brushless motors replaced mechanical brushes with electronic switching, and that changed nearly everything
Image: Intellect (generated)

In short: A brushless DC motor has no brushes rubbing against a spinning contact. Instead, an electronic controller switches current through the windings at the right moment. That single change reduces friction, wear and sparking, and it is why these motors now power drones, power tools and many household appliances.

A brushless DC motor, also called an electronically commutated motor, belongs to the synchronous family and runs on direct current. In a conventional brushed motor, a rotating commutator on the shaft routes current to the rotor windings through soft graphite brushes. The brushes slide against the commutator, and that contact causes friction, dust, voltage drop and sparks. Brushless designs swap this mechanical switch for a controller that uses semiconductor switches, such as transistors, to direct the current through the stator windings.

A sensor tracks the rotor's angle so the switching happens at the correct moment. The benefits follow from removing the sliding contact. The motor has higher efficiency, especially at no load and low load, and it needs little maintenance, since its working life is limited mainly by its bearings. Because the windings sit on the housing rather than on the rotor, heat can pass out by conduction, so the interior can be sealed against dirt.

The maximum power a brushless motor can take is limited almost entirely by heat, which weakens the magnets and damages winding insulation. The trade-off is control complexity. The electronics are more involved and usually more expensive than a brushed motor's simple setup. Controllers may rely on Hall-effect sensors or a rotary encoder, or they may infer rotor position from back-EMF in the undriven coils. Sensorless designs have an extra challenge at startup, because no back-EMF exists while the rotor stands still. Brushless motors became practical largely because of solid-state electronics developed in the 1960s, while brushed DC motors, invented in the 20th century, remain common in low-power uses. Today the brushless design dominates many applications, from disk drives and small cooling fans to electric bicycles, model aircraft and HVAC systems that need fine speed control.

Opens the Intellect+ feed with this card first. Swipe up for the next one.

Sources

To cite this card, link to https://intellectplus.co.uk/app/technology-brushless-dc-electric-motor.

How we source, check and correct cards: Editorial standards.

General information, not professional advice. Spotted an error? Flag the card or see corrections and complaints.

Intellect Plus is a visual educational discovery platform for exploring fascinating facts and ideas. Brain Food, Not Brain Rot. What is Intellect Plus?

Related

Finding something worth knowing…