How semiconductor diodes use controlled electrical avalanches to detect single, faint light particles
In short: Avalanche photodiodes are the semiconductor equivalent of photomultiplier tubes, designed to detect minuscule amounts of light. By applying high reverse bias voltages, these devices trigger an internal avalanche effect that multiplies charge carriers, allowing them to capture signals that would otherwise vanish into the background noise of standard sensors.
Invented by Jun-ichi Nishizawa in 1952, the avalanche photodiode (APD) functions by converting incoming photons into electrical current. Unlike solar cells, which aim to generate power, APDs are precision instruments optimized for sensitivity. They operate via impact ionization, where a photon provides enough energy to separate charge carriers, creating a flow that is then amplified through a high-voltage avalanche breakdown.
The performance of an APD is defined by its gain, which is directly tied to the applied reverse bias voltage. A standard silicon APD typically sustains 100 to 200 volts, yielding a gain factor of about 100. However, advanced structural techniques involving specialized doping and bevelling allow some designs to withstand over 1500 volts, pushing the operating gain beyond 1000. For even higher sensitivity, single-photon avalanche diodes (SPADs) operate in 'Geiger mode' at voltages exceeding the standard breakdown threshold.
Engineers must carefully balance several competing physical factors to optimize these devices. Performance is limited by noise sources like the excess noise factor, which describes statistical fluctuations during the multiplication process, and the Fano factor, which accounts for stochastic variations in energy conversion. Additionally, designers face a classic trade-off: increasing the device area or thickness affects capacitance and transit times, which ultimately dictates the gain-bandwidth product. High-speed systems, such as those used in telecommunications, can achieve gain-bandwidth products exceeding 100 GHz, enabling data speeds of at least 10 Gbit/s.
Material selection is critical for specific applications. Silicon is favored for visible and near-infrared light due to its low excess noise, while germanium and InGaAs are utilized for longer infrared wavelengths. InGaAs, often paired with an InP substrate, is particularly effective for high-speed fiber-optic telecommunications. Other materials, such as gallium-nitride and HgCdTe, extend detection capabilities into ultraviolet and deep-infrared ranges, though the latter often requires cooling to manage dark currents.
Opens the Intellect+ feed with this card first. Swipe up for the next one.
Sources
- Summary by Intellect · source: Avalanche photodiode
To cite this card, link to https://intellectplus.co.uk/app/technology-avalanche-photodiode.
How we source, check and correct cards: Editorial standards.
General information, not professional advice. Spotted an error? Flag the card or see corrections and complaints.
Intellect Plus is a visual educational discovery platform for exploring fascinating facts and ideas. Brain Food, Not Brain Rot. What is Intellect Plus?
Related
More in Electronics · More in Technology · Latest · A–Z · All topics